Cisco SRP521W-K9-G1 Administration Guide - Page 198

Administration Settings Remote Management Click Submit to save your settings. 8 TR-069 Settings Field Description Status Select Enabled to allow auto-configuration of your router from a central server. The default is Disabled. ACS URL Enter the ACS URL provided by your service provider. The ACS URL uses the following format: Protocol://host:port/path • Protocol can be either http or https. • Host can be a fully qualified domain name, or IP address. • Port is optional. • Path is defined by the ACS. ACS Username The username for ACS. The default username is OUISerial Number. This username must match the ACS server username. ACS Password The password for ACS. This password must match the ACS server username. Connection Request This field is automatically populated. The format is http:/ URL /xxx.xxx.xxx.xxx:port. The x's represent the WAN IP address of the SRP. Connection Request This username must match the ACS server username. Username Connection Request This password must match the ACS server username. Password Periodic Inform Interval Specify the interval (in seconds) at which the SRP will initiate connections to the ACS. The default value is 86400 seconds (24 hours). Periodic Inform Enable Select Enabled to allow the router to periodically initiate connections to the ACS. Otherwise, select Disabled. Cisco SRP500 Series Services Ready Platforms Administration Guide (SRP520 Models) 198