Cisco SRP521W-K9-G1 Administration Guide - Page 164

6 164 Configuring Voice Configuring Voice Settings Use Anonymous With RPID When set to yes, use "anonymous" in the SIP message. The default is yes. Use Local Addr In From Use the local SRP IP address in the SIP FROM message. The default is no. Auth INVITE When enabled, authorization is required for initial incoming INVITE requests from the SIP proxy. Reply 182 On Call Waiting When enabled, the SRP replies with a SIP182 response to the caller if it is already in a call and the line is off-hook. To use this feature select yes. The default is no. Call Feature Settings Voice > Line 1-2 > Call Feature Settings Blind Attn-Xfer Enable MOH Server Xfer When Hangup Conf Enables the SRP to perform an attended transfer operation by ending the current call leg and performing a blind transfer of the other call leg. If this feature is disabled, the SRP performs an attended transfer operation by referring the other call leg to the current call leg while maintaining both call legs. To use this feature, select yes. Otherwise, select no. The default is no. User ID or URL of the auto-answering streaming audio server. When only a user ID is specified, the current or outbound proxy is contacted. Music-on-hold is disabled if the MOH Server is not specified. Makes the SRP perform a transfer when a conference call has ended. Select yes or no from the drop-down menu. The default is yes. Cisco SRP500 Series Services Ready Platforms Administration Guide (SRP520 Models)