Dell Latitude 7030 Rugged Extreme Tablet Owners Manual - Page 105
Removing the WWAN/SSD daughter-board
View all Dell Latitude 7030 Rugged Extreme Tablet manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
Figure 90. Removing the WWAN/SSD daughter-board Steps 1. Loosen the two captive screws that secure the WWAN/SSD connector bracket to the system board. NOTE: Loosen the two captive screws in the reverse sequential order mentioned on the WWAN/SSD connector bracket [2 > 1]. 2. Lift the WWAN/SSD connector bracket off the system board. 3. Disconnect and remove the WWAN FPC from the connector on the system board and the WWAN/SSD daughter-board. 4. Disconnect and remove the SSD FPC from the connector on the system board and the WWAN/SSD daughter-board. 5. Remove the three screws (M2x3) that secure the WWAN/SSD daughter-board to the display assembly. 6. Remove the WWAN/SSD daughter-board from the display-assembly. Removing and installing Field Replaceable Units (FRUs) 105