Dell Latitude 7030 Rugged Extreme Tablet Owners Manual - Page 82
About this task, Steps, Removing the RJ45-port assembly
View all Dell Latitude 7030 Rugged Extreme Tablet manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
2. Remove the stylus. 3. Remove the handle, if applicable. 4. Remove the hot-swappable batteries, if applicable. 5. Remove the back-cover assembly. About this task The following images indicate the location of the RJ45-port assembly and provide a visual representation of the removal procedure. Figure 70. Removing the RJ45-port assembly Steps 1. Remove the two screws (M1x2.65) that secure the RJ45-port daughter-board to the system board. 2. Using a plastic scribe, disconnect the RJ45-port daughter-board from the connector on the system board. 3. Remove the four screws (M2x6) that secure the RJ45-port cover to the RJ45-port assembly. 4. Remove the RJ45-port cover from the display assembly. 5. Carefully remove the RJ45-port assembly from the display assembly. NOTE: Technicians must carefully pull the rubber stopper out of the slot to avoid damage to the RJ45-port assembly FPC when removing the RJ45-port assembly from the display assembly. 82 Removing and installing Field Replaceable Units (FRUs)