Dell Latitude 7030 Rugged Extreme Tablet Owners Manual - Page 124
Removing the display assembly
View all Dell Latitude 7030 Rugged Extreme Tablet manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
3. Remove the handle, if applicable. 4. Remove the hot-swappable batteries, if applicable. 5. Remove the SIM card (for hot-swappable batteries), if applicable. 6. Remove the back-cover assembly. 7. Remove the I/O daughter-board. 8. Remove the wireless card. 9. Remove the world-facing camera. 10. Remove the front camera and microphone assembly. 11. Remove the blank top-cover, or the RJ45-port assembly, or the USB-port assembly, or the audio-jack assembly, or the 1D-2D barcode-scanner assembly, whichever is applicable. 12. Remove the WWAN-card heat-sink. 13. Remove the WWAN card, if applicable. 14. Remove the WWAN/SSD daughter-board. 15. Remove the system board. NOTE: When removing the system board to replace/access other parts, the system board can be removed and installed with the heat-sink attached, to simplify the procedure and preserve the thermal bond between the system board and heat-sink. About this task The following images indicate the location of the display assembly and provide a visual representation of the removal procedure. Figure 108. Removing the display assembly Steps 1. Remove the screw (M2x2) that secures the RJ45 port/USB port/audio jack bezel from the display-panel assembly. NOTE: Steps 1 and 2 apply only to tablets shipped with an RJ45 port, or USB port, or audio jack installed. 2. Remove the RJ45 port/USB port/audio jack bezel from the display assembly. 124 Removing and installing Field Replaceable Units (FRUs)