Dell Latitude 7030 Rugged Extreme Tablet Owners Manual - Page 86
Prerequisites, About this task, Steps, Next steps, Installing the USB-port assembly
View all Dell Latitude 7030 Rugged Extreme Tablet manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Prerequisites If you are replacing a component, remove the existing component before performing the installation procedure. About this task The following images indicate the location of the USB-port assembly and provide a visual representation of the installation procedure. Figure 73. Installing the USB-port assembly Steps 1. Align and place the USB-port assembly on the display assembly. 2. Align the screw holes on the USB-port cover with the screw holes on the USB-port assembly. 3. Replace the four screws (M2x6) to secure the USB-port cover to the USB-port assembly. 4. Connect the USB-port daughter-board to the connector on the system board. 5. Replace the two screws (M1x2.65) to secure the USB-port daughter-board to the system board. Next steps 1. Install the back-cover assembly. 2. Install the hot-swappable batteries, if applicable. 3. Install the handle, if applicable. 86 Removing and installing Field Replaceable Units (FRUs)