Dell Latitude 7030 Rugged Extreme Tablet Owners Manual - Page 69
Removing the I/O daughter-board
View all Dell Latitude 7030 Rugged Extreme Tablet manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Figure 58. Removing the I/O daughter-board Steps 1. Loosen the two captive screws that secure the I/O daughter-board FPC bracket to the system board. 2. Lift the I/O daughter-board FPC bracket off the system board. 3. Disconnect the I/O daughter-board FPC from the connector on the system board. 4. Remove the three screws (M2x6) that secure the USB Type-C bracket to the system board. 5. Remove the USB Type-C bracket from the system board. 6. Remove the screw (M2x6) that secures the I/O daughter-board to the display assembly. 7. Carefully remove the I/O daughter-board from the display assembly. NOTE: Technicians must carefully pull the rubber stopper out of the slot to avoid damage to the I/O daughter-board FPC when removing the I/O daughter-board from the display assembly. Removing and installing Field Replaceable Units (FRUs) 69