Dell Latitude 7030 Rugged Extreme Tablet Owners Manual - Page 77
Installing the world-facing camera, if applicable.
View all Dell Latitude 7030 Rugged Extreme Tablet manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
About this task The following images indicate the location of the world-facing camera and provide a visual representation of the installation procedure. Figure 65. Installing the world-facing camera Steps 1. Align the screw holes on the world-facing camera with the screw holes on the front camera and microphone assembly. 2. Replace the two screws (M2x3) to secure the world-facing camera to the front camera and microphone assembly. 3. Connect the world-facing camera FPC to the connector on the system board. 4. Align the screw holes on the camera-connector bracket with the screw holes on the system board. 5. Replace the three screws (M2x3) to secure the camera-connector bracket to the system board. Next steps 1. Install the back-cover assembly. 2. Install the hot-swappable batteries, if applicable. 3. Install the handle, if applicable. 4. Install the stylus. 5. Follow the procedure in After working inside your tablet. Removing and installing Field Replaceable Units (FRUs) 77