Dell Latitude 7030 Rugged Extreme Tablet Owners Manual - Page 60
Removing the base-cover assembly, Steps
View all Dell Latitude 7030 Rugged Extreme Tablet manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Figure 49. Removing the base-cover assembly Figure 50. Removing the base-cover assembly Steps 1. Place the tablet on a flat and clean surface. 2. Remove the 19 screws (M2.5x6.5) that secure the base-cover assembly in place. 3. Using a plastic scribe, pry the back-cover assembly from the bottom side. 4. Carefully lift the bottom side of the base-cover assembly and open it at an angle of 45 degrees. 60 Removing and installing Field Replaceable Units (FRUs)
Figure 49. Removing the base-cover assembly
Figure 50. Removing the base-cover assembly
Steps
1.
Place the tablet on a flat and clean surface.
2.
Remove the 19 screws (M2.5x6.5) that secure the base-cover assembly in place.
3.
Using a plastic scribe, pry the back-cover assembly from the bottom side.
4.
Carefully lift the bottom side of the base-cover assembly and open it at an angle of 45 degrees.
60
Removing and installing Field Replaceable Units (FRUs)