Dell Latitude 7030 Rugged Extreme Tablet Owners Manual - Page 64
Battery, Rechargeable Li-ion battery precautions, Installing the base-cover assembly
View all Dell Latitude 7030 Rugged Extreme Tablet manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Figure 55. Installing the base-cover assembly Steps 1. Place the tablet on a flat and clean surface. 2. Connect the power-button daughter-board FPC to the connector on the system board. 3. Replace the two screws (M2x3) to secure the power-button daughter-board FPC to the system board. 4. Carefully close the base-cover assembly to an angle of 45° degrees. 5. Connect the battery cable to the connector on the system board. 6. Place the base-cover assembly and press the edges of the base-cover assembly to secure in to the tablet. 7. Replace the 19 screws (M2.5x6.5) to secure the base-cover assembly in place. Next steps 1. Install the hot-swappable batteries, if applicable. 2. Install the handle, if applicable. 3. Install the stylus. 4. Follow the procedure in After working inside your tablet. Battery Rechargeable Li-ion battery precautions CAUTION: ● Exercise caution when handling rechargeable Li-ion batteries. 64 Removing and installing Field Replaceable Units (FRUs)