Dell Latitude 7030 Rugged Extreme Tablet Owners Manual - Page 107
Installing the WWAN/SSD daughter-board
View all Dell Latitude 7030 Rugged Extreme Tablet manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
Figure 92. Installing the WWAN/SSD daughter-board Steps 1. Align the screw holes on the WWAN/SSD daughter-board with the screw holes on the display assembly. 2. Align and connect the SSD FPC to the connector on the system board and the WWAN/SSD daughter-board. 3. Align and connect the WWAN FPC to the connector on the system board and the WWAN/SSD daughter-board. 4. Align and place the WWAN/SSD connector bracket onto the system board. 5. Tighten the two captive screws to secure the WWAN/SSD connector bracket to the system board. NOTE: Tighten the two captive screws in the sequential order mentioned on the WWAN/SSD connector bracket [1 > 2]. 6. Replace the three screws (M2x3) to secure the WWAN/SSD daughter-board to the display assembly. Next steps 1. Install the WWAN card. 2. Install the WWAN-card heat-sink 3. Install the back-cover assembly. 4. Install the hot-swappable batteries, if applicable. 5. Install the handle, if applicable. 6. Install the stylus. Removing and installing Field Replaceable Units (FRUs) 107