Dell Latitude 7030 Rugged Extreme Tablet Owners Manual - Page 93
Removing the WWAN-card heat-sink
View all Dell Latitude 7030 Rugged Extreme Tablet manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
About this task The following images indicate the location of the WWAN-card heat-sink and provide a visual representation of the removal procedure. Figure 79. Removing the WWAN-card heat-sink Steps 1. Loosen the captive screw that secures the wireless-card bracket to the wireless card. 2. Lift the wireless-card bracket off the wireless card. 3. Peel back the tape that secures the fan cable to the system-board shielding cover. 4. Peel back the tape that secures the display cable to the system-board shielding cover. 5. Using a plastic scribe, release the system-board shielding cover starting from the release point near the fan-cable connector, on the top side of the tablet. Continue working along the bottom side of the system-board shielding cover. NOTE: The wireless-card thermal plate is permanently attached to the system-board shielding cover. Any replacement of the wireless card requires removal of the system-board shielding cover along with the wireless-card thermal plate. Removing and installing Field Replaceable Units (FRUs) 93