Dell PowerConnect 2848 User's Guide - Page 166
Command: interface vlan, Command: ip address, Example, Syntax Description, Parameters range
View all Dell PowerConnect 2848 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 166 highlights
Example Console (config)# interface port-channel 1 Console (config-if)# Command: interface vlan To configure a vlan type and enter interface configuration mode, use the interface vlan global configuration command. interface vlan vlan-id Syntax Description • vlan-id - VLAN ID Parameters range • vlan-id - Valid VLAN Command Modes Global Configuration Usage Guidelines In case the VLAN doesn't exist ("ghost VLAN") only partial list of the commands would be available under the interface VLAN context. The commands that are supported for VLAN that doesn't exist are: 1 IGMP snooping control 2 Bridge multicast configuration "Example In the following example, for VLAN 1, the address is 131.108.1.27 and the subnet mask is 255.255.255.0: Console (config)# interface vlan 1 Console (config-if)# ip address 131.108.1.27 255.255.255.0 Command: ip address To set the IP address of a device interface, use the ip address interface configuration command. ip address ip-address Syntax Description • ip-address - The IP address to be assigned to the interface. 166 Dell PowerConnect 28xx Systems User Guide