Dell PowerConnect 2848 User's Guide - Page 98
Resending EAP Identity Request 30-65535, Max EAP Requests 1-10
View all Dell PowerConnect 2848 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
- Authenticated ports remain unauthenticated VLAN and Guest VLAN members. Static VLAN configuration is not applied to the port. - The following list of VLANs cannot participate in DVA: an Unauthenticated VLAN, a Dynamic VLAN that was created by GVRP, a Voice VLAN, a Default VLAN and a Guest VLAN. - Network administrators can delete the supplicant VLAN while the supplicant is logged in. The supplicant is authorized during the next re-authentication if this supplicant VLAN is re-created or a new VLAN is configured on the RADIUS server. • Guest VLAN - Specifies whether the Guest VLAN is enabled on the interface. • Periodic Reauthentication - Reauthenticates the selected port periodically, when enabled. The reauthentication period is defined in the Reauthentication Period (300-4294967295) field. • Reauthentication Period (300-4294967295) - Indicate the time span in which the selected port is reauthenticated. The field value is in seconds. The field default is 3600 seconds. • Reauthenticate Now - Permits immediate port reauthentication, when selected. • Authentication Server Timeout (1-65535) - Defines the amount of time that lapses before the device resends a request to the authentication server. The field value is in seconds. The field default is 30 seconds. • Resending EAP Identity Request (30-65535) - Defines the amount of time that lapses before EAP request are resent. The field default is 30 seconds. • Quiet Period (0-65535) - The number of seconds that the device remains in the quiet state following a failed authentication exchange. The possible field range is 0-65535. The field default is 60 seconds. • Supplicant Timeout (1-65535) - The amount of time that lapses before EAP requests are resent to the user. The field value is in seconds. The field default is 30 seconds. • Max EAP Requests (1-10) - The total amount of EAP requests sent. If a response is not received after the defined period, the authentication process is restarted. The field default is 2 retries. Displaying the Port Based Authentication Table 1 Display the Port Based Authentication page. 2 Click Show All. The Port Based Authentication Table opens: 98 Update with your book title