Dell PowerVault NX3500 Hardware Owner's Manual - Page 103
If the system does not start properly, see Getting Help
View all Dell PowerVault NX3500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
3 Remove the following components from the system. See "Installing System Components" on page 49. • Hard drives • USB memory key • NIC hardware key • VFlash media • Expansion card and expansion-card riser • iDRAC6 Enterprise card • Power supply • Fans • Processor and heat sink • Memory modules • System Battery 4 Let the system dry thoroughly for at least 24 hours. 5 Reinstall the components you removed in step 3. 6 Close the system. See "Closing the System" on page 53. 7 Reconnect the system to the electrical outlet and turn on the system. If the system does not start properly, see "Getting Help" on page 113. 8 If the system starts properly, shut down the system and reinstall the expansion card that you removed. See "Replacing an Expansion NIC Card" on page 60. 9 Restart the system. 10 Run the appropriate online diagnostic test. See "Running the System Diagnostics" on page 105. If the tests fail, see "Getting Help" on page 113. Troubleshooting Your System 103