Dell PowerVault NX3500 Hardware Owner's Manual - Page 29

SAS cable A, See Getting Help - review

Get Dell PowerVault NX3500 PDF manuals and user guides View all Dell PowerVault NX3500 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 29 highlights

Table 1-3. LCD Status Messages (continued) Code E1714 Text Causes Unknown error. The system BIOS has Review & clear determined there has SEL. been an error in the system, but is unable to determine its origin. E171F E1810 E1812 E1920 E1A14 PCIe fatal error on Bus ## Device ## Function ## The system BIOS has reported a PCIe fatal error on a component that resides in PCI configuration space at bus ##, device ##, function ##. Hard drive ## The specified hard drive fault. Review has experienced a fault. & clear SEL. Hard drive ## The specified hard removed. Check drive has been removed drive. from the system. iDRAC6 Upgrade iDRAC6 upgrade has Failed. failed. SAS cable A SAS cable A is missing failure. Check or bad. connection. Corrective Actions Check the SEL for more information and then clear the SEL. Remove AC power to the system for 10 seconds and restart the system. If the problem persists, see "Getting Help" on page 113. Remove and reseat the PCIe expansion cards. If the problem persists, see "Troubleshooting an Expansion Card" on page 101. See "Troubleshooting a Hard Drive" on page 100. Information only. See "Getting Help" on page 113. Reseat the cable. If the problem persists, replace cable. If the problem persists, see "Getting Help" on page 113. About Your Solution 29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
About Your Solution
29
E1714
Unknown error.
Review & clear
SEL.
The system BIOS has
determined there has
been an error in the
system, but is unable to
determine its origin.
Check the SEL for more
information and then
clear the SEL. Remove
AC power to the system
for 10 seconds and restart
the system.
If the problem persists,
see "Getting Help" on
page 113.
E171F
PCIe fatal
error on Bus
## Device ##
Function ##
The system BIOS has
reported a PCIe fatal
error on a component
that resides in PCI
configuration space at
bus ##, device ##,
function ##.
Remove and reseat the
PCIe expansion cards.
If the problem persists,
see "Troubleshooting an
Expansion Card" on
page 101.
E1810
Hard drive ##
fault. Review
& clear SEL.
The specified hard drive
has experienced a fault.
See "Troubleshooting a
Hard Drive" on page 100.
E1812
Hard drive ##
removed. Check
drive.
The specified hard
drive has been removed
from the system.
Information only.
E1920
iDRAC6 Upgrade
Failed.
iDRAC6 upgrade has
failed.
See "Getting Help" on
page 113.
E1A14
SAS cable A
failure. Check
connection.
SAS cable A is missing
or bad.
Reseat the cable. If the
problem persists,
replace cable.
If the problem persists,
see "Getting Help" on
page 113.
Table 1-3.
LCD Status Messages
(continued)
Code
Text
Causes
Corrective Actions