Dell PowerVault NX3500 Hardware Owner's Manual - Page 86
Power Distribution Board, Removing the Power Distribution Board
View all Dell PowerVault NX3500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Power Distribution Board The power distribution board is located in your system directly behind the power supply fan modules. This feature provides additional cooling to the power supplies through the power distribution shroud that routes airflow to the power supplies. See Figure 2-19. Removing the Power Distribution Board CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product. 1 Remove the power supplies from the system. See "Removing a Power Supply" on page 77. 2 Locate the power distribution board shroud cover and lift it out. See "Removing the Cooling Shroud" on page 62. 3 Disconnect the power distribution cables from the system board (see "System Board" on page 89) and disconnect the fan cable connectors. 4 Remove the two screws securing the power distribution board to the chassis and then lift the board out. See Figure 2-19. 86 Installing System Components