Dell PowerVault NX3500 Hardware Owner's Manual - Page 61
Insert the card-edge connector firmly into the expansion-card connector
View all Dell PowerVault NX3500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Figure 2-7. Replacing an Expansion NIC Card 1 4 3 2 1 expansion-card latch 3 filler bracket 2 expansion NIC card 4 expansion-card riser 6 Unpack the new NIC card and prepare it for installation. For instructions, see the documentation accompanying the card. 7 Holding the expansion NIC card by its edges, position the card so that the card-edge connector aligns with the expansion-card connector on the expansion-card riser. See Figure 2-7. 8 Insert the card-edge connector firmly into the expansion-card connector until the card is fully seated. 9 Replace the expansion-card latch. See Figure 2-7. 10 Connect any cables to the expansion NIC card. Installing System Components 61
Installing System Components
61
Figure 2-7.
Replacing an Expansion NIC Card
6
Unpack the new NIC card and prepare it for installation.
For instructions, see the documentation accompanying the card.
7
Holding the expansion NIC card by its edges, position the card so that the
card-edge connector aligns with the expansion-card connector on the
expansion-card riser. See Figure 2-7.
8
Insert the card-edge connector firmly into the expansion-card connector
until the card is fully seated.
9
Replace the expansion-card latch. See Figure 2-7.
10
Connect any cables to the expansion NIC card.
1
expansion-card latch
2
expansion NIC card
3
filler bracket
4
expansion-card riser
2
1
4
3