Dell PowerVault NX3500 Hardware Owner's Manual - Page 90
slide the system board assembly toward the front of the chassis.
View all Dell PowerVault NX3500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
9 Remove all the memory modules. See "Replacing Memory Modules" on page 67. NOTE: To ensure proper reinstallation of memory modules, record the memory module socket locations. 10 Carefully route any loose cables away from the edges of the system board. 11 Remove the nine screws securing the system board to the chassis and then slide the system board assembly toward the front of the chassis. CAUTION: Do not lift the system board assembly by grasping a memory module, processor, or other components. 12 Grasp the system board assembly by its edges and lift the assembly away from the chassis. See Figure 2-20. Figure 2-20. Removing and Installing the System Board 1 2 1 screws (9) 2 system board assembly 90 Installing System Components
90
Installing System Components
9
Remove all the memory modules. See "Replacing Memory Modules" on
page 67.
NOTE:
To ensure proper reinstallation of memory modules, record the
memory module socket locations.
10
Carefully route any loose cables away from the edges of the system board.
11
Remove the nine screws securing the system board to the chassis and then
slide the system board assembly toward the front of the chassis.
CAUTION:
Do not lift the system board assembly by grasping a memory module,
processor, or other components.
12
Grasp the system board assembly by its edges and lift the assembly away
from the chassis. See Figure 2-20.
Figure 2-20.
Removing and Installing the System Board
1
screws (9)
2
system board assembly
1
1
2