Dell PowerVault NX3500 Hardware Owner's Manual - Page 39
Warning: Memory, Installation Guidelines
View all Dell PowerVault NX3500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Table 1-4. System Messages (continued) Message Causes Corrective Actions Local keyboard may not work because all user accessible USB ports are disabled. If operating locally, power cycle the system and enter system setup program to change settings. The USB ports are disabled in the system BIOS. Power down and restart the system from the power button, and then enter the System Setup program to enable the USB port(s). Manufacturing mode detected. System is in manufacturing Reboot to take the system mode. out of manufacturing mode. Maximum rank count exceeded. The following DIMM has been disabled: x. Invalid memory configuration. The system will run but with the specified memory module disabled. Ensure that the memory modules are installed in a valid configuration. See "General Memory Module Installation Guidelines" on page 67. Memory Initialization Warning: Memory size may be reduced. Invalid memory Ensure that the memory configuration. The system modules are installed in a will run but with less memory valid configuration. than is physically available. See "General Memory Module Installation Guidelines" on page 67. Memory set to minimum frequency. The memory frequency may If not an intentional setting, be intentionally set lower for check any other system power conservation. messages for possible causes. The current memory Ensure that your memory configuration may support configuration supports the only the minimum frequency. higher frequency. See "General Memory Module Installation Guidelines" on page 67. About Your Solution 39