Dell PowerVault NX3500 Hardware Owner's Manual - Page 33
LCD Log Full., Check SEL
View all Dell PowerVault NX3500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Table 1-3. LCD Status Messages (continued) Code E2021 E2022 E2110 E2111 I1910 I1911 I1912 Text Causes Corrective Actions Incorrect memory Incorrect memory configuration. configuration. Check screen for specific error messages. See "Troubleshooting System Memory" on page 97. General failure during POST. Check screen message. General failure after video. Check screen for specific error messages. Multibit Error The memory module in on DIMM ##. slot "##" has had a Reseat DIMM. multi-bit error (MBE). See "Troubleshooting System Memory" on page 97. SBE log disabled on DIMM ##. Reseat DIMM. The system BIOS has disabled memory single-bit error (SBE) logging and will not log anymore SBEs until the system is rebooted. "##" represents the memory module implicated by the BIOS. Remove AC power to the system for 10 seconds and restart the system. If the problem persists, see "Troubleshooting System Memory" on page 97. Intrusion detected. Check chassis cover. System cover has been removed. Information only. LCD Log Full. Check SEL to review all Errors. LCD overflow message. Check the SEL for details A maximum of ten error on the events. messages can display sequentially on the LCD. The eleventh message instructs the user to check Remove AC power to the system for 10 seconds or clear the SEL. the SEL for details on the events. SEL full. The SEL is full of events Review & clear and is unable to log any log. more. Check the SEL for details on the events, then clear the SEL. About Your Solution 33