Dell PowerVault NX3500 Hardware Owner's Manual - Page 68
See Installing the Cooling Shroud on, that have memory modules installed.
View all Dell PowerVault NX3500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Figure 2-10. Replacing a Memory Module 1 2 3 1 memory module 3 alignment key 2 memory module socket ejectors (2) 6 Align the new memory module's edge connector with the alignment key of the memory module socket, and insert the memory module in the socket. NOTE: The memory module socket has an alignment key that allows you to install the memory module in the socket in only one way. 7 Press down on the memory module with your thumbs to lock the memory module into the socket. When the memory module is properly seated in the socket, the ejectors on the memory module socket align with the ejectors on the other sockets that have memory modules installed. 8 Repeat step 5 through step 8 of this procedure to install the remaining memory modules. 9 Replace the cooling shroud. See "Installing the Cooling Shroud" on page 63. 10 Close the system. See "Closing the System" on page 53. 68 Installing System Components