Dell PowerVault NX3500 Hardware Owner's Manual - Page 24
continued, E122D Memory
View all Dell PowerVault NX3500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Table 1-3. LCD Status Messages (continued) Code E1229 E122A E122C E122D E122E E1310 Text Causes Corrective Actions CPU # VCORE Regulator failure. Reseat CPU. Specified processor Reseat the processor. See VCORE voltage regulator "Troubleshooting the has failed. Processor" on page 102. If the problem persists, see "Getting Help" on page 113. CPU # VTT Regulator failure. Reseat CPU. Specified processor VTT voltage regulator has failed. Reseat the processor. See "Troubleshooting the Processor" on page 102. If the problem persists, see "Getting Help" on page 113. CPU Power Fault. Power cycle AC. A power fault was detected when powering up the processor. Remove AC power to the system for 10 seconds and restart the system. If the problem persists, see "Getting Help" on page 113. Memory Regulator # One of the memory regulators has failed. Failed. Reseat DIMMs. Reseat the memory modules. See "Troubleshooting System Memory" on page 97. On-board regulator failed. Call support. One of the on-board voltage regulators failed. Remove AC power to the system for 10 seconds and restart the system. If the problem persists, see "Getting Help" on page 113. Fan ## RPM exceeding range. Check fan. RPM of specified fan is outside of the intended operating range. See "Troubleshooting System Cooling Problems" on page 96. 24 About Your Solution