HP 1320 Service Manual - Page 107
Formatter, Removing the formatter
UPC - 829160406831
View all HP 1320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
Formatter CAUTION 1. Remove the left-side cover (see Left-side cover). 2. Disconnect one flat, flexible cable (callout 1) at the bottom of the formatter. Do not fold flat, flexible cables. Also, do not straighten pre-folds in flat, flexible cables. 3. Disconnect four cables (callout 2) at the top of the formatter. 4. Remove two screws (callout 3) from the I/O cover. 5. Remove six screws (callout 4) from the formatter plate. Figure 6-14. Removing the formatter 6. Lift the I/O cover, the formatter, and the formatter plate off of the printer and place them on an ESD mat. 7. Lift the formatter plate off of the formatter. 8. Rotate the I/O cover to clear its tabs and remove it from the formatter. ENWW Formatter 95
Formatter
1.
Remove the left-side cover (see
Left-side
cover
).
2.
Disconnect one flat, flexible cable (callout 1) at the bottom of the formatter.
CAUTION
Do not fold flat, flexible cables. Also, do not straighten pre-folds in flat, flexible cables.
3.
Disconnect four cables (callout 2) at the top of the formatter.
4.
Remove two screws (callout 3) from the I/O cover.
5.
Remove six screws (callout 4) from the formatter plate.
Figure 6-14.
Removing the formatter
6.
Lift the I/O cover, the formatter, and the formatter plate off of the printer and place them
on an ESD mat.
7.
Lift the formatter plate off of the formatter.
8.
Rotate the I/O cover to clear its tabs and remove it from the formatter.
ENWW
Formatter
95