HP 1320 Service Manual - Page 137
Removing the ECU 7 of 8
UPC - 829160406831
View all HP 1320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 137 highlights
NOTE 13. Spread the printer frame at the left side of the printer to release the internal tabs, and then lower the ECU slightly and pull it straight back to remove it. Make sure that cables do not become caught on the contact springs as you remove the ECU. Figure 6-42. Removing the ECU (7 of 8) Reinstallation tip When replacing the ECU, you might find it easier to find the correct placement of the ECU pan in the printer if you tip the printer so that it rests on its front. ENWW ECU 125
13.
Spread the printer frame at the left side of the printer to release the internal tabs, and
then lower the ECU slightly and pull it straight back to remove it.
NOTE
Make sure that cables do not become caught on the contact springs as you remove the ECU.
Figure 6-42.
Removing the ECU (7 of 8)
Reinstallation tip
When replacing the ECU, you might find it easier to find the correct placement of the
ECU pan in the printer if you tip the printer so that it rests on its front.
ENWW
ECU
125