HP 1320 Service Manual - Page 169
Table 7-5. Fatal error secondary messages continued, Message, Cause, Solution, Beam error
UPC - 829160406831
View all HP 1320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 169 highlights
Table 7-5. Fatal error secondary messages (continued) Message Cause Beam error Solution 1. Check the laser/scanner cable connections. 2. If the error persists, replace the laser/scanner. Motor error. 1. Check the motor cable connections. 2. If the error persists, replace the motor. Fuser error. The fuser has a malfunction. 1. Unplug the printer for at least ten minutes. 2. Verify that the fuser connector and thermistor connector are both firmly seated in the ECU 3. Perform a heating element resistance check. 4. If the resistance readings are correct, but the error persists, replace the fuser. ENWW Fatal error secondary messages 157
Message
Cause
Solution
Beam error
1.
Check the laser/scanner
cable connections.
2.
If the error persists,
replace the laser/scanner.
Motor error.
1.
Check the motor cable
connections.
2.
If the error persists,
replace the motor.
Fuser error.
The fuser has a
malfunction.
1.
Unplug the printer for at
least ten minutes.
2.
Verify that the fuser
connector and thermistor
connector are both firmly
seated in the ECU
3.
Perform a heating element
resistance check.
4.
If the resistance readings
are correct, but the error
persists, replace the fuser.
Table 7-5. Fatal error secondary messages (continued)
ENWW
Fatal error secondary messages
157