HP 1320 Service Manual - Page 164

Table 7-4. Control panel light message (continued) Light status State of the printer Job Cancel Action Pressing the GO button has no effect. Once the cancellation process has been completed, the printer returns to the Ready state. Manual Feed or Continuable Error This state can be reached in the following circumstances: ● Manual feed ● Out of paper for the specified tray ● General continuable error ● Memory configuration error ● Personality/Job related error To recover from the error and print whatever data is possible, press the GO button. The printer might print a partial page, or the quality might be lower than normal. If the page is too complex, the printer might be out of memory. Try reducing the complexity of the page or try adding more memory. If the recovery is successful, the printer goes to the Processing Data state and completes the job. If the recovery is unsuccessful, the printer returns to the Continuable Error state. Attention This state can be reached in the following circumstances: ● Paper tray is empty ● Door open ● Paper jam ● Misfeed from tray 1. Verify that the print cartridge is present and that the print-cartridge door is closed correctly. 2. Verify that media is present in the input tray. 3. Clear any jams and perform paper-path functional checks. 4. Make sure that the interlocks are operating correctly. To reset the printer after a jam, press the GO button. 152 Chapter 7 Troubleshooting ENWW