HP 1320 Service Manual - Page 21
Table 1-9. Electrical specifications, HP LaserJet 1320nw printer, for current - laserjet fuser
UPC - 829160406831
View all HP 1320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
NOTE NOTE NOTE NOTE Table 1-9. Electrical specifications, HP LaserJet 1320nw printer Power requirements, 110-127 V models 110-127 V (+/-10%), 50/60 Hz (+/-2) Power requirements, 220-240 V models 220-240 V (+/-10%), 50/60 Hz (+/-2 Hz) Power consumption ● During printing (22 ppm): 345 watts (average) ● During Ready (Standby) and PowerSave (instant-on fuser technology) modes: 6 watts ● Off:
Table 1-9. Electrical specifications, HP LaserJet 1320nw printer
Power requirements, 110-127
V models
110-127 V (+/-10%), 50/60 Hz (+/-2)
Power requirements, 220-240
V models
220-240 V (+/-10%), 50/60 Hz (+/-2 Hz)
Power consumption
●
During printing (22 ppm): 345 watts (average)
●
During Ready (Standby) and PowerSave (instant-on fuser
technology) modes: 6 watts
●
Off: <1 watt
Minimum recommended circuit
capacity for typical product
●
4.5 amps at 115 Power requirements (110)
●
2.6 amps at 230 Power requirements (110)
NOTE
Values are current as of April 1, 2004. Values are subject to change without notice. See
or
for current
information.
NOTE
The power reported is the highest value measured for monochrome printing using all
standard voltages.
NOTE
The default time from Ready mode to PowerSave mode and the recovery time from
PowerSave mode to the start of printing is negligible (less than 10 seconds) because of the
instant-on fuser technology.
NOTE
The heat dissipation in Ready mode is 20 BTU/hour.
ENWW
Specifications
9