HP 1320 Service Manual - Page 93
Before performing service, Pre-service procedures, Parts removal order
UPC - 829160406831
View all HP 1320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Before performing service Follow the pre-service procedures before you perform service. Pre-service procedures 1. Remove all media from the product. 2. Place the product on an ESD mat. If an ESD mat or an ESD-protected workstation is not available, discharge body static and ground the product chassis before servicing the product. 3. Remove the print cartridge, see Replacing the print cartridge. 4. Unplug the power cord and the interface cable. 5. Lift the printer (and optional tray 2) off of optional tray 3 (if it is installed). Parts removal order Use the following diagram to determine which parts must be removed before removing other parts. ENWW Before performing service 81
Before performing service
Follow the pre-service procedures before you perform service.
Pre-service procedures
1.
Remove all media from the product.
2.
Place the product on an ESD mat. If an ESD mat or an ESD-protected workstation is not
available, discharge body static and ground the product chassis before servicing the
product.
3.
Remove the print cartridge, see
Replacing
the
print
cartridge
.
4.
Unplug the power cord and the interface cable.
5.
Lift the printer (and optional tray 2) off of optional tray 3 (if it is installed).
Parts removal order
Use the following diagram to determine which parts must be removed before removing other
parts.
ENWW
Before performing service
81