HP CP3525x HP Color LaserJet CP3525 Series Printers - User Guide - Page 220
Overhead transparency defects, Print-quality problems associated with the environment
UPC - 883585892105
View all HP CP3525x manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 220 highlights
Overhead transparency defects Overhead transparencies might display any of the image quality problems that any other type of paper could display, as well as defects specific to transparencies. In addition, because transparencies are pliable while in the print path, they are subject to being marked by the paper-handling components. NOTE: Allow transparencies to cool at least 30 seconds before handling them. ● On the printer driver's Paper tab, select Transparency as the paper type. Also, make sure that the tray is correctly configured for transparencies. ● Check that the transparencies meet the specifications for this product. ● Handle transparencies by the edges. Skin oil on the surface of transparencies can cause spots and smudges. ● Small, random dark areas on the trailing edge of solid fill pages might be caused by transparencies sticking together in the output bin. Try printing the job in smaller batches. ● If the selected colors are undesirable when printed, select different colors in the software program or printer driver. ● If you are using a reflective overhead projector, use a standard overhead projector instead. Print-quality problems associated with the environment If the product is operating in excessively humid or dry conditions, verify that the printing environment is within specifications. See Environmental specifications on page 232. Print quality problems associated with jams ● Make sure that all paper is cleared from the paper path. ● If the product recently jammed, print two to three pages to clean the product. ● The paper does not pass through the fuser, causing image defects to appear on subsequent documents. Print two to three pages to clean the product. Optimize and improve image quality The following procedures can be used to solve most image quality problems. If following the procedures do not improve print quality, go to www.hp.com/support/cljcp3525. Calibrate the product Calibration is a product function that optimizes print quality. If you experience any image-quality problems, calibrate the product. 1. Press the Menu button . 2. Press the down arrow to highlight the CONFIGURE DEVICE menu, and then press the OK button. 3. Press the down arrow to highlight the PRINT QUALITY menu, and then press the OK button. 4. Press the down arrow to highlight the FULL CALIBRATE NOW setting, and then press the OK button. 208 Chapter 11 Solve problems ENWW