HP CP3525x HP Color LaserJet CP3525 Series Printers - User Guide - Page 49
Proxy Port, Idle Timeout, Ipx/spx, Enable, Frame Type, En_8023, En_ii, En_snap, Appletalk, Dlc/llc
UPC - 883585892105
View all HP CP3525x manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Table 2-1 Embedded Jetdirect and EIO Jetdirect menus (continued) Item Sub-item Sub-item Values Description For some networks, you might need to contact your Internet Service Provider (ISP) for the proxy server address. PROXY PORT Type the port number used by the proxy server for client support. The port number identifies the port reserved for proxy activity on your network, and can be a value from 0 to 65535. IDLE TIMEOUT IDLE TIMEOUT: The time period, in seconds, after which an idle TCP print data connection is closed (default is 270 seconds, 0 disables the timeout). IPX/SPX ENABLE ON* ON: Enable the IPX/SPX protocol. OFF OFF: Disable the IPX/SPX protocol. FRAME TYPE AUTO* EN_8023 EN_II Selects the frame-type setting for your network. AUTO: Automatically sets and limits the frame type to the first one detected. EN_8022 EN_SNAP EN_8023, EN_II, EN_8022, and EN_SNAP are frame-type selections for Ethernet networks APPLETALK ENABLE ON* Configures an AppleTalk network. OFF DLC/LLC ENABLE ON* ON: Enable the DLC/LLC protocol. OFF OFF: Disable the DLC/LLC protocol. SECURITY SECURE WEB HTTPS REQUIRED* HTTPS OPTIONAL For configuration management, specify whether the embedded Web server will accept communications using HTTPS (Secure HTTP) only, or both HTTP and HTTPS. HTTPS REQUIRED: For secure, encrypted communications, only HTTPS access is accepted. The print server will appear as a secure site. HTTPS OPTIONAL: Access using either HTTP or HTTPS is permitted. IPSEC KEEP Specify the IPSec status on the print server. DISABLE* KEEP: IPSec status remains the same as currently configured. DISABLE: IPSec operation on the print server is disabled. 802.1X RESET KEEP* Specify whether the 802.1X settings on the print server are reset to the factory defaults. RESET: The 802.1X settings are reset to the factor defaults. ENWW Configure device menu 37