HP CP3525x HP Color LaserJet CP3525 Series Printers - User Guide - Page 46
I/O menu, Embedded Jetdirect and EIO <X> Jetdirect menus
UPC - 883585892105
View all HP CP3525x manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
I/O menu Items on the I/O (input/output) menu affect the communication between the product and the computer. If the product contains an HP Jetdirect print server, you can configure basic networking parameters by using this submenu. You can also configure these and other parameters through HP Web Jetadmin or the embedded Web server. For more information on these options, see Network configuration on page 68. To display: Press the Menu button , select the CONFIGURE DEVICE menu, and then select the I/ O menu. NOTE: Values that have an asterisk (*) are the factory-default values. Some menu items have no default. Item I/O TIMEOUT Sub-item Values Range: 5 - 300 EMBEDDED JETDIRECT MENU See the next table for a list of options. Description Allows you to set the product I/O TIMEOUT in seconds. The default is 15 seconds. Use this setting to adjust timeout for the best performance. If data from other ports appears in the middle of your print job, increase the timeout value. Table 2-1 Embedded Jetdirect and EIO Jetdirect menus Item Sub-item Sub-item Values INFORMATION PRINT PROTOCOLS YES NO* PRINT SEC PAGE YES* NO TCP/IP ENABLE HOST NAME ON* OFF IPV4 SETTINGS CONFIG METHOD BOOTP DHCP AUTO IP MANUAL Description Use this item to print a page that lists the configuration of the following protocols: IPX/ SPX, Novell NetWare, AppleTalk, DLC/LLC. YES: Prints a page that contains the current security settings on the HP Jetdirect print server. NO: A security settings page is not printed. ON: Enable the TCP/IP protocol. OFF: Disable the TCP/IP protocol. An alphanumeric string, up to 32 characters, used to identify the product. This name is listed on the HP Jetdirect configuration page. The default host name is NPIxxxxxx, where xxxxxx is the last six digits of the LAN hardware (MAC) address. Specifies the method that TCP/IPv4 parameters will be configured on the HP Jetdirect print server. Use BOOTP (Bootstrap Protocol) for automatic configuration from a BootP server. 34 Chapter 2 Control panel ENWW