HP CP3525x HP Color LaserJet CP3525 Series Printers - User Guide - Page 37
Sub-item, Values, Description, FULL CALIBRATE NOW
UPC - 883585892105
View all HP CP3525x manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Item AUTO SENSE MODE Sub-item TRAY 1 SENSING PRINT MODES A list of paper types displays. RESTORE MODES OPTIMIZE A list of available options displays. RESTORE OPTIMIZE QUICK CALIBRATE NOW FULL CALIBRATE NOW DELAY CALIBRATION AT WAKE/POWER-ON RESOLUTION EDGE CONTROL Values FULL SENSING (default) TRANSPARENCY ONLY A list of print modes displays. NO YES* Image REt 3600* 1200x600 dpi OFF LIGHT NORMAL* MAXIMUM Description Sets the sensing option for Tray 1 for paper types using AUTO SENSE mode. When FULL SENSING is selected, the product senses every page and switches modes accordingly. The product can distinguish transparencies from other paper types. When TRANSPARENCY ONLY is selected, the product senses only the first page. The product can distinguish transparencies from other paper types. Configure the print mode that is associated with each media type. Use this feature to return all paper type-mode settings to the factory-default settings. Allows you to optimize various print modes to address print quality issues. Use this feature to return all the settings in the OPTIMIZE menu to the factory-default values. Performs a partial product calibration. Performs all product calibrations. This menu controls the timing of the calibration when the product wakes up or is turned on. ● Select NO to have the product calibrate immediately when it wakes up or is turned on. The product will not print any jobs until it finishes calibrating. ● Select YES to enable a product that is asleep to accept print jobs before it calibrates. It may start calibrating before it has printed all the jobs it has received. This option allows quicker printing when coming out of sleep mode or when you turn the product on, but print quality might be reduced. NOTE: For best results, allow the product to calibrate before printing. Print jobs performed before calibration might not be of the highest quality. Sets the resolution at which the product prints. The default value is Image REt 3600. Try the 1200x600 dpi setting to improve printing for detailed line work or small text. The Edge Control setting determines how edges are rendered. Edge control has two components: adaptive halftoning and trapping. Adaptive halftoning increases edge sharpness. Trapping ENWW Configure device menu 25