HP StorageWorks 2/16V Brocade Fabric Watch Administrator's Guide - Supporting - Page 59
Configuring alarm notifications, Configuring Port Log Lock actions, Step 3: Con alarms
View all HP StorageWorks 2/16V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Configuring notifications 3 • "Configuring SNMP notifications" on page 43 • "Configuring API notifications" on page 43 • "Configuring Port Log Lock actions" on page 44 • "Configuring E-mail notifications" on page 44 CONFIGURING ALARM NOTIFICATIONS When you use alarm notifications, error messages are sent to designated locations such as an error log, SNMP trap view, or e-mail. With an error log, you can log in to a particular switch to view the error messages that have been captured for that particular switch. You can parse the log file to make error message searches quicker and easier. To ensure that notifications appear in the error log, use the following command: swd77:admin> fwAlarmsFilterSet 1 The option 1 turns on the alarm notification. If you decide not to have notifications sent, use the following command: swd77:admin> fwAlarmsFilterSet 0 The option 0 turns the alarm notification off. All alarms are suppressed when alarm notifications are turned off, except for the Environment class and Resource class. To verify or view your current alarm notifications, use the fwAlarmsFilterShow command. swd77:admin> fwalarmsfiltershow FW: Alarms are enabled CONFIGURING SNMP NOTIFICATIONS In environments in which you have a high number of messages (for example, hundreds per day) coming from a variety of switches, you might want to receive them in a single location and view them using a graphical user interface (GUI). In this type of scenario, SNMP notifications might be the most efficient notification method. You can avoid having to log on to each switch individually as you would have to do for error log notifications. SNMP notifications are configured using snmpMibCapSet, and within Fabric Watch, using alarms. See "Step 3: Configure alarms" on page 37 for details about setting alarms. For details about SNMP configuration, including traps, see the agtCfgSet and snmpConFig commands in the Fabric OS Command Reference and the Fabric OS Administrator's Guide. CONFIGURING API NOTIFICATIONS In the Brocade Fabric OS API, notifications are triggered programatically. The Brocade Fabric OS API is an application programming interface (API) that provides the method for any application to access critical information about a Brocade SAN. Using Fabric OS API, an application can query or control individual switches or the entire fabric. You can also configure API notifications using the Brocade Fabric OS API. Fabric Watch Administrator's Guide 43 53-0000438-01