Hitachi DV-PF2U Owners Guide - Page 41

English REMOTE CONTROL OF THE TV PROGRAMMING THE REMOTE CONTROL OF THE TV 1 Turn off the TV. 2 Program the remote control Aim the DVD's remote control at your TV set. Hold down the TV POWER/STANDBY Button while you press the number corresponding to your brand of television as shown in the chart. For example; If you have a Hitachi television, press the TV POWER and 1 at the same time. If this Button combination sends a signal that matches with your TV, the TV will turn on, and you'll know the remote is set to control the television. CONTROLLING THE TV Once programmed, the DVD's remote control is ready to control the TV. NOTE: Be aware that not all of your TV's functions may work even though the remote control is correctly programmed. To operate the TV ¡You can turn on your TV by pressing the TV POWER/STANDBY Button. ¡You can change the channels with the CH (K) or CH (L) Button and the volumes with VOL ( ) or VOL ( ) Button for the TV. NOTES: ¡If that Button combination does not change the TV channel, go through the whole list of Button combinations one by one until you find one that does change your TV channel. ¡Also, if your brand of TV is not listed in the chart, try all the number Buttons. One of them may work for you. ¡If the TV channel still doesn't change after going through all the Button combinations listed, it is likely that you will not be able to program this remote control for your TV. ¡With some TVs, the VIDEO/TV Button may not function. To operate the DVD Press the VIDEO/TV Button to operate your DVD with the remote. TV Brands HITACHI SONY RCA SANYO ZENITH PANASONIC1 PANASONIC2 SHARP1 SHARP2 TOSHIBA JVC MITUBISHI MAGNAVOX FUNAI GOLDSTAR Press the TV and This Number 1 2 3 4 5 6 7 8 9 0 CLEAR +10 SUBTITLE AUDIO DISPLAY - 41 - EN 2C15