Konica Minolta bizhub 363 bizhub 423/363/283/223 Copy Operations User Guide - Page 145
Half-Fold Position], Punch Horizontal Position Adjustment]
View all Konica Minolta bizhub 363 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
7.1 [System Settings] 7 [Half-Fold Position] Adjust the center staple & fold and half-fold positions for each paper size. 0 Before making any adjustments, create a sample using the half-fold function. Adjust the center staple position while checking the created sample. 0 This adjustment is available if the Saddle Stitcher SD-509 is installed. 0 When adjusting the half-fold position in parallel with the left edge of paper, contact your service repre- sentative. 1 Press the Utility/Counter key ö [Administrator Settings] ö [System Settings] ö [Expert Adjustment] ö [Finisher Adjustment] ö [Half-Fold Position]. 2 Select the size of paper of which half-fold position is adjusted. 3 Press [+] or [-] to adjust the half-fold position while checking the sample. 4 Press [OK]. 5 Create a sample, and check the print result. [Punch Horizontal Position Adjustment] Adjust the horizontal position of the punched holes for each paper type. 0 Before making any adjustments, create a sample using the punch settings. Adjust the center staple position while checking the created sample. 0 This adjustment is available if the Punch Kit PK-517 is installed. 1 Press Utility/Counterö[Administrator Settings]ö[System Settings]ö[Expert Adjustment]ö[Finisher Adjustment]ö[Punch Horizontal Position Adjustment]. 2 Select the type of paper of which the horizontal punched hole position is adjusted. 3 Press [+] or [-] to adjust the punched hole position while checking the sample. 4 Press [OK]. 5 Create a sample, and check the print result. bizhub 423/363/283/223 7-13