Konica Minolta bizhub 363 bizhub 423/363/283/223 Copy Operations User Guide - Page 188
Loading paper in LCT - power button
View all Konica Minolta bizhub 363 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 188 highlights
8.1 Paper 8 Loading paper in LCT The following procedure describes how to load paper in LCT. 0 LCT is an option. 0 You cannot pull out the LCT tray when the Sub Power Switch is turned off. You cannot also pull out the LCT tray in the Low Power or Sleep mode. 1 Press Tray Release Button. % This unlocks the LCT tray and slides the LCT tray slightly forward. 2 Pull out the LCT tray. % 1. Film NOTICE Be careful not to touch the Film. 1 3 Load paper into the right side of the LCT tray so that the side to be printed (the side facing up when the package was unwrapped) faces up. % Do not load so many sheets of paper that the top of the stack is higher than the , mark. % Do not load the LCT tray with paper of a size other than that previously specified. % If paper is curled, the paper type must be specified. % If special paper is loaded, the paper type must be specified. % Load letterhead paper so that the side to be printed on faces down. 4 Load paper into the left side of the LCT tray so that the side to be printed (the side facing up when the package was unwrapped) faces up. 5 Close the LCT tray. bizhub 423/363/283/223 8-4