Konica Minolta bizhub 363 bizhub 423/363/283/223 Copy Operations User Guide - Page 92
Image Adjust]
View all Konica Minolta bizhub 363 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
5.4 [Application] 5 Settings [Margin Position] [Image Shift] [Adjust Value] [Original Direction] d Reference To set the zoom: Press [Basic] ö [Zoom]. Select an option from [Auto], [Left], [Top] and [Right]. When Auto is selected, the binding position is automatically set. • This function automatically determines the binding position according to the orientation of the loaded original. If the original length is 11-11/16 inches (297 mm) or less, a binding position along the long side of the paper is selected. If the original length is more than 11-11/16 inches (297 mm), a binding position along the short side of the paper is selected. • The binding position is set on the upper or left-side end. • Be sure to load the original so that its top side is placed in the back. If the original is loaded in any other orientation, this setting fails. Adjust the image position according to the binding margin. [Change Back Shift] Adjust the image position on the back side of the paper in the 2-sided copy mode. • Inch area: Press [+] or [-] to specify the binding margin width (1/16 to 3/4 inch). When [None] is selected, the binding margin width is set to 0 inches. • Metric area: Enter the binding margin width (0.1 to 20.0 mm). When [None] is selected, the binding margin width is set to 0 mm. Select the orientation of the original loaded into the ADF or placed on the Original Glass. 5.4.5 [Image Adjust] Copies the original image at the center of the paper when the paper is larger than the original. % Press [Application] ö [Image Adjust]. Settings [Centering] Copies the original image at the center of the paper without enlarging it. bizhub 423/363/283/223 5-36