Kyocera FS-3140MFP FS-3040MFP/3140MFP Operation Guide Rev-2.2011.1 - Page 147

Sending Functions Adjusting Density Use the procedure below to adjust the density when scanning the originals. The table below shows the available settings. Item Detail Manual Adjust density using 7 levels. Auto Optimum density is selected according to the density of the original. 5 The procedure for adjusting the density is explained below. 1 Press the Send key. 2 Place the original. Function Menu: a b *1**C*o*l*o*r**S*e*l*e*c*t*i*o*n**T** 2 Original Size T 3 Original Image T [ Exit ] 3 Press the Function Menu key. Function Menu appears. Density: a b 1 Auto *2 ***M*a*n*u*a*l 4 Press the U or V key to select [Density]. 5 Press the OK key. Density appears. 6 Press the U or V key to select [Auto] or [Manual]. If you select [Manual], press the OK key, and then select the density on the next screen. 7 Press the OK key. Completed. is displayed and the screen returns to the basic screen for sending. 8 Specify the destination, and press the Start key to start sending. NOTE: Press the Reset key to reset the settings selected in Function Menu. 5-13