Kyocera FS-3140MFP FS-3040MFP/3140MFP Operation Guide Rev-2.2011.1 - Page 409

Precautions for Handling the Memory Module Correct Incorrect To protect electronic parts, discharge static electricity from your body by touching a water pipe (faucet) or other large metal object before handling the memory module. Or, wear an antistatic wrist strap, if possible, when you install the memory module. Installing the Memory Module 1 Turn off the machine and disconnect the power cord and interface cable. 2 Remove the right cover. 3 Remove the screws and the memory slot cover as shown in the figure. 4 Remove the memory module from its package. 5 Aligning the cutouts of the memory module with the matching keys of the socket, carefully plug the memory module into the memory socket until it clicks in place. Then, push down the memory module to secure. CAUTION: Before inserting a memory module in the machine, make sure that the machine is switched off. Appendix-3