Kyocera FS-3140MFP FS-3040MFP/3140MFP Operation Guide Rev-2.2011.1 - Page 288

Default Setting (System Menu) Service Setting: a b *1**S*e*r*v*i*c*e**S*t*a*t*u*s***** 2 Network Status 3 New Developer [ Exit ] 3 Press the U or V key to select [Service Setting]. 4 Press the OK key. Service Setting appears. Print. Are you sure? z Network Status 5 Press the U or V key to select [Service Status] or [Network Status]. 6 Press the OK key. A confirmation screen appears. The screen shown is the one when Network Status is selected. [ Yes ] [ No ] 7 Press [Yes] (the Left Select key). The selected report is output. Accepted. is displayed and the screen returns to the Service Setting menu. NOTE: When acceptance of jobs is prohibited, Print, storing functions are restricted now. is displayed and the output is canceled. Send Result Report Automatically print a report of transmission result when a transmission is complete. The table below shows the available settings. The default setting is Error Only. Item Off On Error Only Description No result report printed. Result report automatically printed. Transmitted images can also be attached. Result report printed only when a transmission ends in an error. If two or more destinations are registered, the reports are printed only for the destinations with the errors. Transmitted images can also be attached. Use the procedure below to send a Result Report. Sys. Menu/Count.:a b *1 **R*e*p*o*r*t 2 Counter 3 System [ Exit ] 1 In the Sys. Menu/Count. menu, press the U or V key to select [Report]. 8-96