Kyocera FS-3140MFP FS-3040MFP/3140MFP Operation Guide Rev-2.2011.1 - Page 349

Maintenance 5 Insert the new waste toner box as shown at the left. When the box is set correctly, it will snap into place. 6 Make sure that the waste toner box is correctly inserted and close the left cover. 7 After replacing the toner containers and the waste toner box, clean the internal parts. For instructions, refer to Cleaning on page 9-2. Prolonged Non-Use and Moving of the Machine Prolonged Non-use If you ever leave the machine unused for a long period of time, remove the power cord from the wall outlet. We recommend you consult with your dealer about the additional actions you should take to avoid possible damage that may occur when the machine is used next time. 9 Moving the Machine When you move the machine: • Move it gently. • Keep it as level as possible to avoid spilling toner inside the machine. • Be sure to consult a service technician before attempting long distance transportation of the machine. WARNING: If you ship the machine, remove and pack the developer unit in a plastic bag and ship them separately from the machine. Replacing the maintenance kit (MK-370) When the print position shifts out of place or originals are not feeded, components must be replaced. Contact your Service Representative and purchase the maintenance kit. Follow the procedure below to replace the maintenance kit. Replace the paper feed roller 1 Open the left cover of the document processor. 9-7