Kyocera FS-3140MFP FS-3040MFP/3140MFP Operation Guide Rev-2.2011.1 - Page 72

Preparation before Use Loading Paper in the Cassettes The standard cassette will each hold plain paper, recycled paper or color paper. The standard cassette holds up to 500 sheets of A4 or smaller plain paper (80 g/m2). The following paper sizes are supported: Legal, Oficio II, Letter, Executive, Statement, A4, B5, A5, A6, Folio, and 16K. IMPORTANT: • You should not use inkjet printer paper or any paper with a special surface coating. (Such papers may cause paper jams or other faults.) • When using media types other than plain paper (such as recycled or colored paper), always specify the media type setting. (Refer to Specifying Paper Size and Media Type for the Cassettes on page 2-43) The cassettes can hold paper with weights up to 120 g/m2. • Do not load thick paper that is heavier than 120 g/m2 in the cassettes. Use the multi purpose tray for paper that is heavier than 120 g/m2. NOTE: Statement and A6 can only be used in cassette 1. 1 Pull the cassette all the way out of the printer. IMPORTANT: When pulling the cassette out of the printer, ensure it is supported and does not fall out. Standard paper sizes are marked on the inside of the cassette. 2 Turn the paper size dial so that the size of the paper you are going to use appears in the paper size window. NOTE: When the paper size dial is set to OTHER the paper size must be set into the printer on the operation panel. Refer to Specifying Paper Size and Media on page 2-43. 2-36