Kyocera FS-3140MFP FS-3040MFP/3140MFP Operation Guide Rev-2.2011.1 - Page 50
Network Setup (LAN Cable Connection), TCP/IP IPv6, IPX/SPX, NetBEUI, IPSec
View all Kyocera FS-3140MFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Preparation before Use Network Setup (LAN Cable Connection) The machine is equipped with network interface, which is compatible with network protocols such as TCP/IP (IPv4), TCP/IP (IPv6), IPX/SPX, NetBEUI, IPSec, and AppleTalk. It enables network printing on the Windows, Macintosh, UNIX, NetWare and other platforms. The table below shows the items required for each of the settings. Configure the printer's network parameters as appropriate for your PC and your network environment. For details of the procedure, refer to the Network Setup on page 8-120 or Network Security on page 8-139. NOTE: When COMMAND CENTER is used, network parameters and security settings can be conveniently changed and checked from your PC. For more information, refer to COMMAND CENTER (Settings for E-mail) on page 2-28. Menu System Network Setting TCP/IP Settings Submenu TCP/IP IPv4 Setting IPv6 Setting Protocol Detail DHCP Bonjour IP Address Subnet Mask Default Gateway NetBEUI SNMPv3 FTP (Server) FTP (Client) SMB SNMP SMTP (E-mail TX) POP3 (E-mail RX) RAW Port LPD IPP IPP Over SSL HTTP HTTPS LDAP Setting On/Off On/Off On/Off IP address IP address IP address On/Off On/Off On/Off On/Off On/Off Port number: 21 On/Off On/Off On/Off On/Off On/Off On/Off On/Off Port number: 631 On/Off On/Off On/Off On/Off 2-14