Kyocera FS-3140MFP FS-3040MFP/3140MFP Operation Guide Rev-2.2011.1 - Page 292

Default Setting (System Menu) 8 Press the OK key. Completed. is displayed and the screen returns to the Send/Box Density menu. Correct. Bk Line Correct fine black lines (black streaks caused by contamination), which may appear on the copies, when the document processor used. Paper feed direction The table below shows the available settings. Item Off On(Low) On(High) Description No correction performed. Correction performed. The reproduction of the image becomes lower when using Off. Correction performed. Select this item if black streak remains after using On (Low). The reproduction of the image becomes lower when using On (Low). NOTE: Using Correcting Fine Black Line can impair reproduction of fine characters. It is recommended to keep the default ([Off]). Use the procedure below to specify the setting for correcting fine black lines. Sys. Menu/Count.:a b : Document Box ; Edit Destination *< **A*d*j*u*s*t*/*M*a*i*n*t*.****** [ Exit ] 1 In the Sys. Menu/Count. menu, press the U or V key to select [Adjust/Maint.]. 8-100