Kyocera FS-3140MFP FS-3040MFP/3140MFP Operation Guide Rev-2.2011.1 - Page 358
Maximum Number of, scanned s., Job is canceled., Send error., Error Message, Check points - + error 1102
View all Kyocera FS-3140MFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 358 highlights
Troubleshooting Error Message Maximum Number of scanned pages. Job is canceled. Send error. #### Check points - Is the acceptable scanning count exceeded? - Corrective Actions Reference Page Scanning cannot be performed due - to insufficient memory of scanner. The job is canceled. Press the OK key. Press the OK key to print, send or - store the scanned pages. Press the Stop key to cancel printing, sending or storing. An error has occurred during transmission. The possible error codes and their descriptions are as follows. 1101: The server name of the SMTP server is not set correctly or the host name is incorrect when sending scan data to an FTP server. Use COMMAND CENTER and register the SMTP server name and the host name correctly. 1102: The login user name is incorrect or the domain name has not been entered. Enter login user name, domain name and password correctly. 1103: The network path name is incorrect or you do not have access to the folder specified. Use - COMMAND CENTER and register the path name correctly. 1104: No recipient address. Enter E- mail address correctly. 1105: E-mail - The SMTP protocol setting is turned off. Use COMMAND CENTER and turn on the SMTP protocol setting. Scan to PC (SMB) - SMB setting is turned off. Use COMMAND CENTER and turn on the SMB setting. Scan to PC (FTP) - FTP setting is turned off. Use COMMAND CENTER and turn on the FTP setting. 1106: The sender address setting under E-mail: SMTP is not registered. Use COMMAND CENTER and register the sender address. 10-8