Kyocera KM-2560 Fax System (M) Operation Guide Rev-2.0 - Page 104
File Format Setting, File Separation Setting, FAX Operation Advanced, OPERATION GUIDE, Activating Time
View all Kyocera KM-2560 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
FAX Operation (Advanced) 2 Press [Change] of Activating Time. 3 Select [All Day] or [Preset Time]. To forward received Requirement - Activating Time Specify the time for activating the requirements. Print or forward the faxes received during the preset time according to the requirements. originals all day, All Day Start Time 0 : 0 select [All Day], Preset Time press [OK] and then go to step 5. End Time 0 : 0 To set the forwarding time, select [Preset Cancel Time] and go to the Status next step. OK 6/6/2006 10:00 4 Press [+]/[-] to enter Start Time and End Time, and then press [OK]. NOTE: Enter the time on the 24 hours system. 5 Press [OK]. 6 To exit from this setup, press [Close] several times until the System Menu default screen is displayed. File Format Setting If you are sending the file as an E-mail attachment or transferring it to a folder (SMB or FTP), select PDF or TIFF as the file format. 1 Follow steps 1 to 4 of Registration of Forwarding Settings (Forward All) on page 5-13. 2 Press [Change] of File Format. 3 Press [PDF] or [TIFF], and then [OK]. 4 Press [OK]. 5 Press [OK]. 6 To exit from this setup, press [Close] several times until the System Menu default screen is displayed. File Separation Setting If you are sending the file as an E-mail attachment or transferring it to a folder (SMB or FTP), you can choose whether the pages are separated. 1 Follow steps 1 to 4 of Registration of Forwarding Settings (Forward All) on page 5-13. 5-20 OPERATION GUIDE