Kyocera KM-2560 Fax System (M) Operation Guide Rev-2.0 - Page 133

FAX Operation (Advanced) Transmission Restriction This function allows you to send or receive originals only when communication requirements are met. Using this function can limit other parties with which you can communicate. Specifically, you must register communication requirements (Permit FAX No./Permit ID No.) and set the transmission limit in advance. When the machine sends or receives originals, you do not need to perform a special operation for this particular function, and you can operate the machine normally. When sending or receiving has actually started, the machine correctly conducts transmission that meets communication requirements, but when the transmission does not meet the requirements, the machine indicates an error. This mode also allows you to set a [Reject List] for Reception Restriction so that reception from senders on the list of Rejected FAX numbers or from senders whose Local FAX Number is not registered are rejected. NOTE: Before using transmission restriction, be sure to read the following prerequisites, communication establishing requirements, and reception rejection requirements thoroughly, and consult with the other parties with which you communicate. Send Restrictions Prerequisites Communication Establishing Requirements • Register Permitted FAX numbers or Permitted ID numbers.† (Refer to Registering Permit FAX No. on page 5-50 or Registering Permit ID No. on page 5-54.) • Send restriction settings are specified in [Permit List + Address Book] in Send Restrictions. (Refer to Setting Send Restriction on page 556.) • Register the Local FAX Numbers or Local FAX IDs of other parties. • The recipient's Local FAX Number matches a Permitted FAX No. registered on the machine. • The recipient's Local FAX ID matches a Permitted ID registered on the machine. • When the number was dialed using the Address Book or One-touch keys, the last 20 digits of the dialed number match the last 20 digits of the recipient's Local FAX Number. (Excludes manual transmissions.) OPERATION GUIDE 5-49