Kyocera KM-2560 Fax System (M) Operation Guide Rev-2.0 - Page 49
Clear, Pause], FAX Operation Basic, OPERATION GUIDE, Character Entry Method on, of the Appendix
View all Kyocera KM-2560 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
FAX Operation (Basic) 7 Enter the destination name to be displayed on the Address Book, and press [OK]. Up to 32 characters can be entered. NOTE: For details on character entry, refer to Character Entry Method on page 2 of the Appendix. 8 Press [Address]. 9 Use [S]/[T] to select FAX. 10 Press [Change Dest.]. 11 Use the numeric keys to enter the number of the receiving system. Address - FAX No. Entry Pause Space Add a new FAX destination. Enter FAX number with numeric keys. Back Space Sub Address Transmissio n Start Speed ECM E n cryp t ed Transmissio n Status Cancel OK 6/6/2006 10:00 NOTE: Up to 32 digits can be entered as the number of the receiving system. Press [Space] to enter a space. Use [W] or [X] to move the cursor. To correct the fax number, press [Back Space] on the touch panel, and delete the digits one by one before reentering the fax number. To delete the number entirely, press the Clear key on the operation panel. [Pause] Pressing this key adds about three seconds of waiting time during dialing. For example, when dialing the receiving system on an external line, you can use this method to insert a pause before resuming dialing after you dial a specific number. 12 Press [Sub Address]. When you do not use sub address communication, go to step 16. OPERATION GUIDE 3-17