Kyocera KM-2560 Fax System (M) Operation Guide Rev-2.0 - Page 27

Preparation Before Use Selection of Transmit Terminal Identification (TTI) The transmit terminal identification (TTI) is the information about the machine (transmit terminal) to be printed out on the fax on the receiving system. The information includes transmission date and time, the number of transmission pages, and the fax number. This machine enables the user to select if the TTI is printed out on the fax on the receiving system. Regarding the location of the information to be printed, you can select inside or outside of the page image being sent. NOTE: You can specify a separate TTI for fax transmissions and Internet fax transmissions. Normally, the Local FAX Name is printed in the transmit terminal identification (TTI). However, when job accounting has been enabled, and you send originals after entering an Account ID, the Account Name is printed. 1 Press the System Menu key. 2 Press [FAX/i-FAX], [Next] of Transmission, [Next] of FAX (Send Fax) or iFAX (Send i-FAX) and then press [Change] of TTI. 3 Press the location for FAX - TTI printing the information on the fax. If you don't want to print, press [Off]. Attach TTI (Transmit Terminal Identification) in transmitted documents. Off Ou tsid e In s id e Status 4 Press [OK]. Can cel OK 6/6/2006 10:00 5 To exit from this setup, press [Close] several times until the System Menu default screen is displayed. OPERATION GUIDE 2-3